We’ve decided to sell the boat. Not an easy decision, but we’re tidying up our finances and she doesn’t make sense for us at the moment. We loved having her though, and will definitely buy another one in a few years.
She’ll be up on BoatPoint / eBay etc shortly, but in the meantime I thought I’d chuck it on here in case any of you know someone who might be interested.
The paint could do with a touch up but otherwise she’s very sound. Since we bought her from Matt in 2006 we’ve added a ski pole, carpet, a bilge pump, fixed up the seats and bought a brand new Dunbier trailer. The motor is solid despite its age and we’re including all the lifejackets and ski gear (except our wakeboard). We never got around to painting her name on the side so I suppose she’s unnamed, but as far as we’re concerned she’s Muchacha.
Headed out for a quick wake session on the bay this morning with Iao and Jed. I was a bit tentative - it was my first time back on the board since I tore my ab muscles - but Iao and Jed were sliding around enjoying themselves. Jayne never goes in the bay (sharks, jellyfish, seaweed, plankton) but was content to drive me when I was riding and then lap up the sun for the rest of the time.
We had a minor incident with the boat (which we still haven’t named properly - Tasty / Muchacha / Tight Squeeze / Povvo Pack). After we’d finished riding we decided to zoom out towards Clifton Springs to see if the water was flatter over there, so I opened up the throttle and we whizzed along flat out at around 5,000rpm (55km/h) for 10 minutes or so. Then, for no apparent reason, the revs suddenly dropped, the motor cut out and I couldn’t start it again. Wouldn’t turn over. Apart from the obvious disappointment that the motor was buggered I was slightly gutted that we’d have to row the thing back to the boat ramp, given that we’d travelled roughly 5km.
Then a couple of minutes later she started, so I carefully stuck it in forward and crept along at 1,000rpm for 30 seconds … no problem … then tried it a bit quicker … no problem … then up to 3,000rpm … no problem … back to idle … no problem … back to 3,000rpm … no problem. She was as smooth as silk again.
No idea what happened, but my guess is that the old Chrysler got a bit hot and said “I’ve had enough of this”. It’s 30 years old, after all.
Anyway, doesn’t seem to be any harm done. She started fine when I flushed it out when we got home. Any ideas Matt?
Been a good weekend so far. Up early for a surf on Saturday, a lazy breakfast with Kate, Bec, Damian and John in Barwon Heads, home to hitch the boat up for a wake session in the afternoon, back home again for a BBQ (in the rain!), some Texas Hold ‘Em, up early-ish again today for another surf, home for pancakes, then a solid afternoon’s gardening. I’m surfing again in the morning (4-5ft offshores, which should be good) and then we’re heading to Sim and Bek’s in the afternoon for Mexicana night. Phew!
The wake session wasn’t great (lots of chop) but all the Skandia Geelong Week boats were out so we joined the flotilla and watched the monster yachts as they approached Geelong instead. We had to stay out of their way though - they were moving pretty quickly ‘cos they had their main sails up. It was an amazing sight and great to be out there less than 50m away rather than watching them from the shore!
I’ve been slack with the jayneandmarty.com posts over the last few weeks. No excuse other than I was on holidays and didn’t really feel like sitting in front of the computer. But I’m back now, so here’s a round up of what we’ve been up to.
Wakeboarding day trip to Eildon, 29 Dec 07
On Sat 29th Jayne, me, Jon B and Iao went to Eildon for a day’s wakeboarding. Jayne and I left Geelong at 6.30am with Georgia and Lindsay, who had stayed an extra night with us. Paul and Catherine (and Nicki) were at Eildon for the day too, so the plan was to drive the girls up there and hand them back to their owners before meeting up with Jon and Iao and heading for the water. The drive up took us just under 3 hours (we went the Princes Freeway/Ring Road/Hume Freeway/Seymour/Yea/Alexandra route, which was smooth and easy) and after a bit of stuffing around at the Eildon shops and a wait at the busy Jerusalem Creek boat ramp we were on the water by 11am.
The lake’s at about 23%, which is around 20m below full, but there’s still plenty of water there. We tooled out of the Jerusalem Creek inlet at the obligatory 5 knots and headed right towards the Big River arm looking for some flat water. There were heaps of boats out on the water (understandable, as it was at least 35 degrees, Christmas week and a Saturday) but we managed to find a reasonably sheltered bay and shared it with only three or four other boats, one of which was a Pride Cheetah like ours called Herbie.
On Jon’s second run he had a big stack and ripped his boardies up the side. The rip got progressively worse as the day went on and by 3pm we were keeping an eye out for the water cops in case they busted him for indecent exposure. You can see the rip in the photo just before the “I’m the King of the World” one in the slideshow. At about 3pm we met up with Paul and Catherine. I had a go on their biscuit behind Nicki’s boat and Lindsay had a board behind our boat (video below). We finally pulled the boat out at about 4.30, all of us stuffed. After a quick feed from the Eildon bakery we cruised home, arriving just before 9pm.
It was a big day, and I’d do it like that again, but even better would be staying up there for the night. It was a bit like driving to the snow for the day - by 5pm all you want to do is relax in the pub and talk about the day over a beer or two. The last thing on your mind is driving home.
Picasa slideshow
Lindsay’s wakeboarding video
Golf with Peter and Christine
On Jan 2 Peter and I went for a hit of golf at Queenscliff, and Christine came too to drive the cart. Apparently she’d never been to a golf course before, let alone driven a cart, so it’s no wonder that she was VERY cautious on the throttle for the first three holes. By the fourth, though, she’d got the hang of it and was tearing around like a veteran with a big smile on her face (witness Peter holding on for dear life in the last two pics).
More wakeboarding
On Saturday we went for another board, this time on Corio Bay with Iao, Jed and Gita. The wind was up a bit but we zoomed over to the northern part of the bay to look for shelter and managed to find some reasonably flat water. Jayne won’t go in the bay (sharks) and Gita was just along for the ride but Iao, Jed and I all had a crack. It was Jed’s first time and he (a) managed to get out of the water first go, and (b) looked very comfortable on both edges. He was all smiles whenever he pulled off a decent carve.
Unfortunately I hurt myself on my second run - I caught the front edge, overstretched and then faceplanted. Before my face had even hit the water I knew I’d ripped one of the muscles in my abdomen but I also must have smacked my head around a bit because for the rest of the day and through Sunday I was nauseous and dizzy. This morning I went to the doctor and she confirmed a muscle tear and some ear trauma. Nothing too serious though so I’ll be at work tomorrow.
All in all it was a great couple of weeks off. Having Greg and Donna with us meant that the house was full and busy most of the time (sometimes a bit too busy!) but we all managed to find our own space.
Jayne and I spent plenty of time with each other at the beach, on the boat, with friends and family and just enjoying the hot weather … summer’s great!
Back in May I wrote about how we’d decided to freshen the boat up a bit. This afternoon, six months later, I finally got around to one of the tasks on the list - carpet.
I don’t really know what inspired me to get busy and sort it out. I just felt like fiddling with the boat this afternoon.
I took the seats out of the boat, measured up … (2m wide floor + 2×50cm high sides) x 2.6m of length … and went to Clark Rubber to buy some marine carpet. I probably could have found some cheap stuff on eBay but I was in the mood to buy and fit carpet TODAY and couldn’t wait. No patience, I know.
I only got as far as cutting the carpet today - I started to do it with scissors but got a blister so looked a bit harder for a Stanley knife (and found one). I’ll continue during the week so that we can use the boat again next weekend if we want to. The pressure’s on!
** Update - the slideshow now includes shots of the floor carpet (as opposed to the carpet up the sides) all glued in and the seats back in place. I’ve also glued half the sides carpet but haven’t got photos yet. It’s looking really good - (a) I’m pleased with the result and (b) it was really cheap. Should have done it ages ago!
